Cut a 6-inch section of 2four-gauge craft wire. Hold the wire about ¾ of the way from one end with the needle-nose pliers. Twist the pliers to create a 90 degree angle in the wire.
Thread the longest end of the wire through one of the heart beads, letting the bead stop at the bend in the wire. Thread the teardrop onto the wire then the remaining heart bead. Bend the wire 90 degrees as it exits from the second heart bead.
Press the wires together behind the angel's wings, or the heart beads. Twist them tightly so that the beads stay together. Lay the angel's body and wings face down on a flat surface.
Cut a 3-inch section of 2four-gauge wire. Thread it through the hole in the round crystal bead so the bead is centered on the wire. Pinch the wire together and twist it once, tightly against the bead. This round crystal is the angel's head.
Put the round crystal bead at the top of the teardrop bead so that the wire is at the bottom almost touching the point in the teardrop. Thread the left piece of the wire hanging from the round bead through the hole in the heart bead on the left. The wire should thread from front to back.
Twist the wires together, keeping the round bead at the top of the teardrop. Cut off any excess wire. Press the connecting wires together at the back of the angel in order that the connections are not visible from the front.
Hang Swarovski Angel crystal with clear monofilament. You can tie the line to the back of angel. And be care for that leave wire cutters beyond children's reach..Do child-friendly back.
May you have a nice day.
没有评论:
发表评论