Draw your Swarovski crystal designs a piece of paper. Remember, what you will use the color and size of the crystal. You can find the design of online (see Resources) for example. When painting, do not get too close to the crystal.
Size Graphic design to the finished tape a piece of cardboard the same. Use two to three pieces of transparent tape paper to protect your board.
Hot fix transfer paper cut with scissors than you one o'clock a big crystal design. Remove the white backing, save them for later use.
Sticky side up on your hot fix transfer paper design. Use small pieces of tape to secure it to your design.
Swarovski crystal and crystal orientation, the face down, on the transfer paper over your pattern, use the diamond position. One of the diamond tip slightly sticky is easy for you to allow the crystal pickup. When you pick up a crystal, fix transfer paper on the sticky. Use of positioning, it is sharp, the other side of place to make any adjustments.
Remove the thermal transfer paper and carefully peel off tape from the cardboard from the repair. Replace the white backing to the transfer paper. Check your design, from the front to see if adjustments need to be made. Open the iron set on cotton.
Please send your design, face down, the white support, in the face to medium-sized books or any hard, flat surface you. Gently pull off, but do not support moving the white crystals.
Transfer you to your face cloth paper stick to stick in the design. By removing and re-adjust the change, rather than transfer paper design at the bottom of the crystal rotation.
Near your project is convenient location. Use carefully to transfer your work area, ironing board with a hot iron. Remember that keep children and pets away from ironing.
没有评论:
发表评论